I’ve obviously been pretty busy over the last few weeks.
After I got the playroom finished, I immediately set my sights on my home office. It has basically been the room where “stuff” goes to die. I was climbing over ladders, toys and wayward pieces of furniture to get to my makeshift desk.
That photo was taken on a good day, after I had picked up a bit. Don’t ever fool yourself into thinking that bloggers lead a glamorous lifestyle.
Anyway, since I spend so much time in that room, I decided that I wanted to focus on it next. I began by cleaning it out and giving away a lot of its contents to locals via my Facebook page. Once the clutter was gone, I knew that I wanted the focus of the room to be the far wall (where my computer is in the above photo).
Looking to branch out a bit from my usual graphic paint treatments, I thought bringing in some warm wood tones wood be fun. I love the white wooden planked walls that are so popular of late, but white wood doesn’t really match my home’s style. But, they did spark an idea.
I bought a few packages of EverTrue 32″ pine tongue and groove plank paneling at Lowe’s and played around with some layout ideas on my floor. I ultimately decided that a herringbone pattern would look pretty neat.
I calculated that I would need about 10 packages (at $9.58 each) to cover the entire wall. I split all of those planks into 3 piles and stained them in 3 different shades of brown. I used the little half pint cans of stain – Kona and Summer Oak from Rustoleum and Provencial from Minwax – and it was just the right amount to stain all of the boards. I used Minwax Pre-Stain Wood Conditioner before staining since pine often looks blotchy after staining if it’s not prepared correctly. With the stain and wood conditioner, I simply wiped it on with a lint-free cloth, let it sit for about 15 minutes, and then wiped off the excess.
Because I wanted the pattern to be even on both sides of my wall and I wanted the angle of the boards to be exactly 45-degrees, I found the center point of my wall and drew out an angle. To do that, I used a framing square and a level to draw a 90-degree angle and then used an angle square to find the 45-degree angle.
I lined one of my boards up on the 45-degree angle and secured it to the wall using my pneumatic brad nailer. The planks are incredibly thin and light, so I was able to just use 5/8″ brads (i.e. little nails). I put two brads in each end of the board.
I used four boards in each section of the herringbone, since four boards across was half of the length as one board is long. I used a random pattern for the colors as I went along. Because the boards are tongue and groove, I was able to slide them each into place and secure them with the brads.
Until I got to the edges of the wall, there wasn’t any measuring to it. I just had to count by four and rotate the boards when I got to that point. They went up on the wall very quickly.
If my boards didn’t completely meet up, I dabbed a little bit of dark brown craft paint behind them. It’s super professional around here, y’all.
Things got a little more complicated when I reached the edges of the wall. The planks had to end in a 45-degree angle to sit flush with the wall edge. I just used my angle square to draw those angles and then I cut them with my miter saw set at 45-degrees. I also had to cut most of them shorter as well, so I measured the length of those boards by holding them in place and marking where they should be cut and then cut them with the miter saw set at 90-degrees. I removed the baseboard from just that wall so that the panels would go all the way to the floor. I only have one outlet on that wall, so I made sure that I didn’t nail too close to it so that I wouldn’t get any brads through the wiring behind the wall (I don’t think my brads were long enough to worry about that, though).
The cutting wasn’t hard, but it was time consuming. I did this entire project by myself (and I think it killed Tom that I wouldn’t let him participate), and I later found out that my neighbor had come up with her own contingency plan of getting me to the hospital in case I cut off a finger while I was home alone. Thanks, Ellie! 😀 That totally cracked me up, but it made me so glad to have her as a neighbor. In reality though, using a saw really is dangerous if you aren’t taking the proper precautions, so wear eye protection and check and then double check your hand placement before you bring down the blade.
I completely forgot to take a picture of what the wall looked like once all the planks were installed. They weren’t all perfect, though. Some of them touched the adjacent wall and others were about an inch too short. It was fine, though, because I knew I was going to stain and install some lattice trim around the edges to finish it off. I measured and cut the angles at 45-degrees, pre-conditioned and stained, and then installed it to the wall. I actually used a slightly longer brad – I think 1 inch – to secure the boards to the wall.
I taped off and covered my new wall and then painted my ceiling “Lindsay White” (1 gallon of Glidden flat white paint off the shelf with an extra 1 oz of white added in at the paint counter) and the rest of my walls in Glidden Blue Blazes.
The end result is pretty awesome, if I do say so myself. I still have some touching up to do on the paint, but I’ll probably wait until the rest of the room is complete to deal with that.
I have some great pieces of furniture that are going to go along that wall, so I can’t wait to show you what it will look like once it’s finished. There are still lots of fun surprises in store for my home office!
So, what do you think of my herringbone wood paneled wall? I love it so much that I want to marry it.
Joining the Best DIY Projects of November link up at Beneath My Heart.
Amber at Love, Laugh, Live Well says
I LOVE this idea! This would be a great accent wall for our bedroom. Do you think that this is a project that a newbie could complete without losing their mind? LOL. Great job!
Rhonda says
This is easily one of THE MOST AMAZING things I have EVER seen!!
Christa @ a*typicaljourney says
This looks simply stunning! I’d love to do something similar behind my TV. I really need a feature wall and LOVE those 3-D Architectural tiles, but the’re so expensive. This seems like a great alternative.
A job well done 🙂 And you did it on your own!!
Kendra says
It looks amazing! I have a couple of walls I’ve been wanting to plank/panel for a long time, but now that everyone is doing it, I’ve wanted to find a unique take on it. I don’t think I ever would have thought of the herringbone design, but I love it! Can’t wait to see the rest of the room!
the Blah Blah Blahger says
That is the sexiest wall I’ve ever seen.
Jenni Gomila says
ABSOLUTELY LOVE IT!!! I think i will steal the idea to make my barn door out of for my bedroom!!! You rock! Thanks!!!!
Stephanie says
It looks amazing, I love the varying stain shades!
Donna says
WOW! That is stunning! So very creative – and thank you for sharing it! 🙂 Any way you can tell me what size your wall is – trying to figure out how to estimate for my wall and that might give me an idea if I’m on track! lol
Linda Weeks says
Yeah, this was a great post. I’d love to try it too! If herringbone works this well, I wonder if a zig-zag would be cool….. hmm. I’m still scared of my miter saw… but it would def be a cool thing to try! If it were along an exterior wall, the insulating properties could be considerable! thanks, and happy thanksgiving to you and yours!
Jessica Reurich says
Lindsay, this is Amazingly Fabulous!!!
Lori says
It looks absolutely amazing!!!! Kudos to you for doing it all by yourself – I don’t think I’ll ever be brave enough to do something like that on my own. Your efforts were definitely worth it! Gorgeous!!
amy says
very cool with the different stains! nice work!
amy
Bee says
All I can say is WOW! that is amazing- what a beautiful job! I am just hopping over from Beneath My Heart party:)
Cheryl says
Wow!! Absolutely amazing! You must be an extremely patient individual. I can’t wait to see it with the furniture.
jessica@fourgenerationsoneroof says
Wow this is perfect! Can’t wait to see the entire room together 🙂
Linda says
Awesome job here. Wow. That is a daunting project. It came out great though so it was worth it. Best wishes, First time here. Following on Twitter and Google+. Linda
Michelle Hinckley says
Girl…you never cease to amaze me!
Christine @ Let's Get Crafty! says
I just realized I hadn’t commented on this amazing wall! I made a very small version with rulers but this is so freaking awesome I can’t stand it. I’m in love!
Leslie Stewart @ House on the Way says
I love your wall! It is so cool and creative! Thanks for sharing.
Leslie
Lindsay Ballard says
Thanks so much, Leslie! It makes me super happy!
tracy says
I just found your blog and am obsessed with your paneled wall. It. Is. Stunning.
Lindsay Ballard says
Thanks so much, Tracy! I’m pretty obsessed with it, too! 😀
Mindi says
I love this! So beautiful! Pinning!
Lindsay Ballard says
Thank you so much, Mindi!
gimena says
Wow! thats insane!!! Huge respect for pulling that off! it lis amazing! I might do it for my bedroom wall.
Congratulations! Cant imagine the hard work it went into.
Reid says
I want to marry your wall too!!! I’m totally going to do a wall like this!!!
Debbie says
Thank you so much for this great hopping off point! I can see a number of different patterns that could be made using these materials. We live in a builder’s brown house and it needs character. I can’t wait to go to Lowe’s and start my own experiment.
Andrea says
WOW!!!! This is fantastic. Patience and time definitely went into this and I give it a 10! nicely done.
Madeleine says
Looking good. How long time did it take (without the painting)?
college goers says
It’s really a great and helpful piece of info. I am satisfied that you just shared this helpful info with us.
Please keep us up to date like this. Thank you for sharing.
janelle lewing says
I want to do this with cedar fence pickets!!! On my wall in living room I have a beam that runs the center of my room!!! And the hits the wall as well as the wall buts up against my fireplace brick!!!!! Can someone plz tell me what I need to do to find Centerpoint since I have this beam and it makes the wall look like it’s off center plz help!!!!!! Thanks
Emma says
Wow! That is absolutely insane!!! That takes a lot of guts to pull off! It’s incredible! I’m thinking about doing it for my bedroom wall.
Congratulations! I can’t imagine how much effort went into it.