Makely

Let's Make Life Awesome

You are visiting: Home » Decorating/DIY » Create Your Decor » DIY Mottled Egg Spring Wreath

DIY Mottled Egg Spring Wreath

by on 1,888 Comments

I have a new obsession with quail eggs.

I totally blame Kimba. She posted this gorgeous wreath on her blog, A Soft Place to Land, last week, and I have been unable to get it out of my mind ever since.

I love everything about it. I love the pine straw wreath. I love the large amount of eggs used in the design. And of course, I love the mottled look of the quail eggs themselves (This wreath is actually faux eggs that were rolled in crushed quail eggs, in case you were wondering how quail managed to lay such large eggs!).

Unable to figure out where to find such a wreath (although Urban Farmhouse has now added it to their online catalog) and being too impatient to actually go out and hunt down actual quail eggs, I set out to make a similar one for myself. As usual, this one ended up a little different than my original idea, as I tend to change design ideas half way through my projects. That’s my prerogative, or so says Bobby Brown.

Photobucket

I put together a little tutorial in case you wanted to make one, too. I made it in one evening, so it’s a fast project that can be completed for around $12 if you have absolutely none of the supplies on hand. You could even use this as your Five Dollar Challenge project if you already had the supplies that you can’t buy at the dollar store.

SUPPLIES:
Steel Wool (I used the ‘Super Fine’ grade.)
Grapevine Wreath (Mine is 18″.)
Plastic Easter Eggs in 2 sizes (Check the dollar store for eggs in different sizes for $1 a bag.)
White Spray Primer
White Spray Paint (The cheap kind works fine – You don’t necessarily need the kind for plastics.)
Blue Acrylic Paint (I used Ceramcoat’s ‘Caribbean Blue’.)
Antique White Acrylic Paint (I used Ceramcoat ‘Antique White’.)
Brown Acrylic Paint (I used CraftSmart’s ‘Espresso’.)
Small Foam Brush (Mine was 1″.)
Old Toothbrush
Craft Wire (Mine is 22 gauge wire.)
Ivory ribbon (I used a roll of ivory wired ribbon with gold edging that I found in the wedding section of the dollar store.)

Photobucket

Begin by sanding each egg with the steel wool outdoors. You are just looking to take the shine off the eggs and rough them up enough so that the paint will stick. You WILL want to wear gloves and long pants to do this. If you get the little steel wool fibers on you, your skin will itch like crazy. It happened to me, so I know what I’m talking about.

Photobucket

You’ll notice that some of the eggs I used originally had painted designs on them. It’s perfectly fine to use that type of egg. However, there are some eggs that have a molded design on them – like a raised bunny or carrot. You do not want to use that type of egg.

Once you are finished sanding, rinse the eggs under running water and dry them.

Next, set the eggs on your spray painting tarp. The eggs I bought are hinged, so the top and bottoms pieces don’t come completely apart. I think they are easier to paint like this, but you may find you like the kind that separates better.

Photobucket

Spray the white primer on the eggs, making sure to cover all the way down to the base of each piece (you don’t need to paint inside the eggs). After the primer dries, spray a coat of white paint on them in the same way.

About an hour later, you can move your operation indoors. I squeezed some of the antique white and blue paint on paper plates and used my foam brush to paint half of the eggs antique white and half of them blue. I put two coats of color on each of the eggs.

Photobucket

Acrylic paint dries quickly, so it wasn’t long before I was able to take the eggs back outside to do a little faux mottling on them. I squeezed some of the brown paint onto another paper plate and used an old toothbrush to splatter the eggs. I know you used this technique to make some splatter paint shirts in 1987, so don’t act like you don’t know how to do it. And if you are a young’un, you simply dip the toothbrush into the paint, turn it so that the bristles face the eggs, and run your finger down the bristles. Your hands will get messy and you will probably get paint on your clothes, but your eggs will look fabulous.

I used the dark brown paint and then a dark brown/antique white mixture on both sets of eggs. I also used just the antique white on the blue eggs.

Photobucket

Once your eggs are dry, you will have a nice pile of painted eggs. My husband came in at this point and remarked, “Wow! Those actually look like real eggs,” so I knew they looked good. 🙂

Photobucket

Next, you will want to cut the craft wire in about 12 inch lengths for each egg. My eggs had several little holes pre-drilled in each end (I’m assuming it had something to do with the molds at the factory). I’m not sure if all plastic eggs have these holes, but if not, you could probably poke a whole with a large needle. You’ll want to be able to thread the wire through both ends of the egg.

Photobucket

You’ll now be ready to begin adding your eggs to your wreath. Position each egg where you want it on the wreath, and push the ends of the wire down through the wreath vines to the back. Twist the wires together tight on the back to secure
the egg in place.

Photobucket

I looped the ends of the wire around so that it lies flat on the back of the wreath.

Photobucket

If you can see the wire coming out of the ends of your eggs, push the wire flush against the egg. If you don’t want to use craft wire, you could always hot glue the eggs in place. I like using the wire because you can kind of adjust the eggs a little bit once your wreath is finished.

I placed all of my large eggs on the wreath first.

Photobucket

Then, I filled in with the smaller eggs, leaving a place for the ribbon I’ll use to hang the wreath.

Photobucket

The last step will be to loop the ribbon around the wreath. I left really long ribbon ends since I wasn’t sure how low I was going to hang my wreath. The ribbon doesn’t need to be secured to the wreath, as the weight of the wreath will hold it in place as it hangs.

Photobucket

After I figured out the length of ribbon I needed, I used a small nail and actually nailed the ribbon to the very top of my door (not the front of the door, but the top). I cut the extra length of ribbon just behind the nail so that you couldn’t see it from the inside when the door is closed.

Photobucket

My family really loves the new wreath. It was simple to put together and looks quite beautiful on our front door. It’s not as luxurious as the quail wreath that was my original inspiration, but this wreath is just perfect for us!

…And just so you know, my quail egg obsession has only escalated after this project. I even found some blown quail eggs at an antique shop in Florida this weekend, but then realized that the chances of me getting them back home to Texas in one piece were slim to none. I’ll be blowing my own quail eggs soon to use around my home, but that will have to be the subject of another post!

I’m adding this post to Rhoda’s “Spring Fluffing Party” over at Southern Hospitality. Hop over there and check it out!

About Lindsay Ballard

Lindsay Ballard is a former college mascot turned political geek turned roller derby playing, DIY fanatic.

Lindsay chronicles her projects, design ideas, and lifestyle tips here at Makely, where she shares tutorials and inspiration. Her DIY designs are bold and graphic, while her spirit is fun and full of color.

Comments

  5. Rhoda @ Southern Hospitality says

    Very cute idea, Lindsay! I love how you figured out what to do & did it. I probably won't be doing this one, but it's a great idea. I already did a front door piece over the weekend. Hope you'll join my SPring fluffing party on Wed.! I'm going to add your idea to my Tumblr file.

    Reply

  16. Rona's Home Page says

    I love your new wreath. I’m impressed with the work that went into it. And that the fact that it was made from plastic eggs is very cool.

    Reply

  17. Lou Cinda says

    I love this! It looks so good on your door! Great tutorial too, I think I will try to do this too! Great post!

    Lou Cinda 🙂

    Reply

  20. Darlene - Our Creative Life says

    Great idea! I need some tiny eggs for a little nest I have…do they make tiny plastic eggs that I can do this to?

    Reply

  25. Living With Lindsay says

    Oops! Thanks, Rhoda! You wouldn’t believe the number of times I’ve typed your name and actually remembered to spell it right. Ha! This coming from a Lindsay with an ‘A,’ so I know the feeling!

    Reply

  29. Chari at Happy To Design says

    Hello Lindsay…

    What a darling wreath and your tutorial was great! This might be a project that even I can do..hehe! Your honey is right, the eggs look so real! Your wreath looks fabulous on your door…Happy Spring Fluffing!

    Warmest wishes,
    Chari

    Reply

  31. Still Learning says

    I too fell in love with that wreath that Kimba posted. I haven’t not thought about every single day since she posted it and am dying to do my own interpretation of it. How funny, I wonder how many of us will do that. She should do a linky party of all of us trying to copy that wreath.

    Reply

  32. Tami (Pixeltrash) says

    Awe… who doesn’t have a million of those plastic eggs? I might just have to try this. I think I even have a grapevine wreath. PS… the holes in the eggs are to prevent choking, I think. My son once put a whole half in his mouth. It got stuck there and he was able to breath through the hole. Not sure if that’s really the reason, but I bet it has something to do with it.

    Reply

  34. Runner Mom says

    How darlin’! I saw the original wreath on Kimba’s blog too! Yours is great! Thanks for the tutorial!

    Hugs,
    Susan

    And…I remember how to splatter paint!!!

    Reply

  37. Pearl Maple says

    Oh now that is really cool, just as my mind was thinking but we can not find those pretty natural eggs around here just nasty shiny pink things there you were the answer.

    Liking this a lot and thank you for sharing the inspiration.

    Reply

  38. Anonymous says

    Lindsay,

    The wreath is really cute and the tutorial was a very good one. The instructions were so clear and the photos of each step, just great. Thanks for taking all that time. I just wanted you to know that it was very much appreciated!

    melissalee1@bellsouth.net

    Reply

  45. Kristi says

    Wow this is an old post, but I just stumbled on it and I wanted to comment that I LOVE it! This is a great use for all those plastic eggs I have laying around in a box in the garage.

    Reply

  46. Marie says

    Cute wreath, great eggs!! I have a great idea to cut the paint time in half……Make a batch of chalk paint and you won’t have to use steel wool to scuff the eggs or even clean them! The chalk paint sticks to anything and it is super easy to make! Recipe: 1 cup paint, 2 Tbsp. white, non sanded grout (ask someone at Home Depot or Lowes), water. In a disposable container (I use my rinsed out frozen yogurt cups and mix w/the spoon they give you) mix the non sanded grout with a little water to make a paste (more on the watery side) and then add the 1 cup of paint. Stir well! This paint will paint over any surface with no sanding or prepping! Happy Easter! 🙂

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *